President Teddy II +
With this president teddy II+you have a very user-friendly CB in your possession! The successor to the President Teddy features a built-in vox function for hands-free use. After choosing the AM/FM modulation and the desired channel, you only have 2 buttons to operate with this president teddy II+. The noise reduction (squelch) and the volume knob. In short, super easy to use.
Attention, this president teddy II + is suitable for 12V connection voltage, for use on 24V you need a converter to 12V.
Benefits
- Renewed version
- 40 channels
- LCD Display
- 7 different background colors
- VOX function
Specifications
| Supply: | 13.2 V |
| Number of channels: | 40 |
| AM: | yes |
| FM: | yes |
| Channel selector: | up/down |
| Volume: | volume adjustment and ON/OFF |
| Squelch: | manual squelch |
| ASC: | yes |
| Display: | digital |
| VOX: | yes |
| Filter ANL: | yes |
| Filter NB: | yes |
| F / Menu function key: | yes |
| Key beep: | yes |
| Preset channel: | EMG (customizable) |
| Microphone plug: | front (6 pins) |
| External loudspeaker jack: | yes |
| Size: | 125 (W) x 151 (D) x 45 (H) |
| Gewicht: | 0,9 kg |
Technical specifications
| GENERAL | |
| Aantal kanalen: | 40 |
| Modulation modes: | AM / FM |
| Frequency ranges: | from 26,965 MHz to 27,405 MHz |
| Antenna impedance: | 50 ohm |
| Power supply: | 12 V |
| Accessories supplied: | Ultra light electret microphone with support |
| Filter: | ANL (Automatic Noise Limiter) built-in |
| TRANSMISSION | |
| Frequency allowance: | +/- 200 Hz |
| Carrier power: | 4 W AM / 4 W FM |
| Transmission interference: | inferior to 4 nW (- 54 dBm) |
| Audio respons: | 300 Hz to 3 KHz |
| Emitted power in the adj. channel: | inferior to 20 μW |
| Microphone sensitivity: | 7 mV |
| Drain: | 1.7 A (with modulation) |
| Modulated signal distortion: | 2% |
| RECEPTION | |
| Maxi. sensitivity at 20 dB sinad: | 0.5 µV - 113 dBm (AM) / 0.35 µV - 116 dBm (FM) |
| Frequency response: | 300 Hz to 3 kHz |
| Adjacent channel selectivity: | 60 dB |
| Maximum audio power: | 2.5 W |
| Squelch sensitivity: | min 0,2 μV - 120 dBm / maxi 1 mV - 47 dBm |
| Frequency image rejection rate: | 60 dB |
| Intermediate frequency rej. rate: | 70 dB |
| Drain: | 160 ~ 420 mA |
Download here the manual.
